Faculty Directory

Kim, Jungho

Kim, Jungho

Professor
Program Director, ARPA-E, 2024–present
Mechanical Engineering
Maryland Energy Innovation Institute
2188 Glenn L. Martin Hall, Building 088
Website(s):

EDUCATION

  • Ph.D., University of Minnesota, Minneapolis, 1990
  • MSME, University of Minnesota, Minneapolis, 1986
  • BSME, University of California, Berkeley, 1982

EMPLOYMENT

  • 2024-Present, Currently on assignment to ARPA-E as a Program Director
  • 2008-Present, Professor, Department of Mechanical Engineering, University of Maryland
  • 2011-2012, Invited Professor, Korea Advanced Institute of Science and Technology, Daejeon, Korea
  • 2001-2008, Associate Professor, Department of Mechanical Engineering, University of Maryland
  • 1998-2001, Assistant Professor, Department of Mechanical Engineering, University of Maryland
  • 1992-1998, Assistant Professor, Department of Engineering, University of Denver
  • 1990-1992, Senior Mechanical Engineer, Physical Sciences Department, Arvin/Calspan Corp, Buffalo, NY
  • 1983-1990, Research and Teaching Assistant, Department of Mechanical Engineering, University of Minnesota 
  • 1982-1983, Mechanical Engineer, Plant Engineering, Lawrence Berkeley Laboratory

HONORS AND AWARDS

  • Rosemount Instrumentation Award (1989)
  • ASME Fellow (2005)
  • University of Maryland College of Engineering Poole and Kent Senior Faculty Teaching Award (2016)
  • University System of Maryland Board of Regents' Faculty Award for Excellence in Teaching (2016)
  • MIPS 30th Anniversary Award in Energy with Whisker Labs (2017)

 

PROFESSIONAL MEMBERSHIPS

  • Associate Editor, International Journal of Multiphase Flow
  • Associate Editor, Microgravity Science and Technology
  • Associate Editor, International Journal of Energy & Technology
  • Editorial Advisory Board, Experimental Thermal Fluid Science
  • Past Chair of the ASME K-13 Committee on Multiphase Heat Transfer

 

Phase change heat transfer process, investigation of fundamental heat transfer mechanisms in pool and flow boiling and spray cooling in Earth and microgravity environments, heat exchange within complex heat exchangers, building thermal energy storage and their use in demand/response and energy trading, vacuum insulated windows.


2022

2021

2020

  • Lebon, M.T., Hammer, C.F., and Kim, J. “Using a Modified Single-Phase Model to Predict Microgravity Flow Boiling Heat Transfer in the Bubbly Flow Regime”, Experimental Heat Transfer, 2020, doi.org/10.1080/08916152.2020.1782534.

2019

  • Lebon, M.T., Hammer, C.F., Kim, J., “Gravity Effects on Subcooled Flow Boiling Heat Transfer”, Int. Journal of Heat and Mass Transfer, Vol. 128, pp. 700-714, 2019.
  • Jo, J., Kim, J., and Kim, S.J., “Experimental investigations of heat transfer mechanisms of a pulsating heat pipe”, Energy Conversion and Management, Vol. 282, pp. 331-341, 2019
  • Dhruv, A., Balaras, E., Riaz, A., and Kim, J. “A Formulation for High Fidelity Simulations of Pool Boiling in Low Gravity”, Int. J. of Multiphase Flow, doi.org/10.1016/j.ijmultiphaseflow.2019.103099, 2019

2018

  • Al Hashimi, H., Hammer, C., Lebon, M.T., and Kim, J., “Phase change heat transfer measurements using temperature sensitive paints”, J. of Heat Transfer, Vol. 140, Issue 3, March, 2018.

2017

  • Saenz, P.J., Wray, A.W., Che, Z., Matar, O.K., Valluri, P., Kim, J., and Sefiane, K., "Geometrically-controlled drop evaporation: Dynamics and universal scaling law", Nature Communications, 8:14783, 2017.

  • Jung, J., Kim, J., Lee, H., and Kim, S., “Measurements of phase distributions on the surface in subcooled pool boiling”, Int. Journal of Heat and Mass Transfer, Vol. 115, Part A, pp. 62-72, 2017.

2016

  • Scammell, A. and Kim, J., “A Study of Gravitational Effects on Single Elongated Bubbles”, Int. Journal of Heat and Mass Transfer, Vol. 99, pp. 904-917, 2016.
  • Fukatani, Y., Orejon, D., Kita, Y., Takata, Y., Kim, J., and Sefiane, K., “Effect of ambient temperature and relative humidity on hydrothermal waves (HTWs) of volatile drops”, Physical Review E, 93, 043103, 2016.
  • Solotych, V., Lee, D., Kim, J., Amalfi, R.L., and Thome, J. Boiling Heat Transfer and Two-Phase Pressure Drops within Compact Plate Heat Exchangers: Experiments and Flow Visualizations”, Int. Journal of Heat and Mass Transfer, Vol. 94, pp. 239-253, 2016.

2015

  • Scammell, A. and Kim, J., “Heat transfer and flow characteristics of rising Taylor bubbles”, Int. Journal of Heat and Mass Transfer, Vol. 89, pp. 379-389, 2015.
  • Sáenz P.J., Valluri P., Sefiane K., Matar O. K., and Kim J., “Two-phase transient evaporation of sessile drops with three-dimensional phenomena”, J. of Fluid Mechanics, Vol. 772, pp. 705-739, 2015.
  • Solotych, V., Kim, J., and Dessiatoun, S., “Local Heat Transfer Measurements Within a Representative Plate Heat Exchanger Geometry Using Infrared (IR) Thermography”, J. of Enhanced Heat Transfer, Vol. 21, 4-5, pp. 353-372, 2015.

2014

  • Fukatani, Y., Wakui, T., Hussain, S., Kohno, M., Takata, Y., Sefiane, K., and Kim, J., “Analysis of Droplet Evaporation using IR Thermography”, Applied Thermal Engineering, Manuscript 1067103, 2014. 
  • Bhavnani, S., Narayanan, V., Qu, W., Jensen, M., Kandlikar, S., Kim, J., and Thome, J., “Boiling Augmentation with Micro/Nanostructured Surfaces: Current Status and Research Outlook”, Nanoscale and Microscale Thermophysical Engineering, Vol. 18, No. 3, pp. 197-222, 2014.

2013

  • Sefiane, K., Fukutani, Y., Takata, Y., and Kim, J., “Thermal Patterns and Hydrothermal Waves (HTWs) in Volatile Drops”, Langmuir, 29 (31), pp. 9750-9760, 2013.
  • Trainer, D., Kim, J., and Kim, S.J., “Heat Transfer and Flow Characteristics of Air-Assisted Impinging Water Jets, International Journal of Heat and Mass Transfer, Vol. 64, 501-513, 2013.
  • Jung, J.H., Kim, S.J., and Kim, J. “Observations of the Critical Heat Flux Process During Pool Boiling of FC-72”, ASME Journal of Heat Transfer, Vol. 136, pp. 041501-1-12, 2013.















    .

2012

  • Raj, R., Kim, J., and McQuillen, J., “Pool Boiling Heat Transfer in Microgravity: Results from the Microheater Array Boiling Experiment (MABE) on the International Space Station”, ASME Journal of Heat Transfer, Vol. 134, pp. 101504-1-14, 2012
  • Kim, T.H., Kommer, E., Dessiatoun, S., and Kim, J., “Measurement of Two-Phase Flow and Heat Transfer Parameters Using Infrared Thermometry”, International Journal of Multiphase Flow, Vol. 40, pp. 56-67, 2012
  • Raj, R., Kim, J., and McQuillen, J., “On the Scaling of Pool Boiling Heat Flux with Gravity and Heater Size”, ASME Journal of Heat Transfer, Vol. 134,  No. 1, pp. 011502 , 2012

2011

  • Abbasi, B. and Kim, J. “Development of a General, Dynamic Pressure-Based, Single-Phase Spray Cooling Heat Transfer Correlation”, ASME Journal of Heat Transfer, Vol. 133, pp. 052201-1 to 052201-10, May 2011, DOI: 10.1115/1.4002779.
  • Abbasi, B. and Kim, J. “Prediction of PF-5060 Spray Cooling Heat Transfer and Critical Heat Flux”, ASME Journal of Heat Transfer, Vol. 133, pp. 101504-1 to 101504-13, August, 2011, Issue 10, DOI: 10.1115/1.4004012.

2010

  • Abbasi, B. and Kim, J. “Dynamic Pressure Based Prediction of Spray Cooling Heat Transfer Coefficients”, International Journal of Multiphase Flow, 10.1016/j.ijmultiphaseflow.2010.01.007, Vol. 36, pp. 491-502, 2010.
  • Raj, R., Kim, J., and McQuillen, J. “Gravity Scaling Parameter for Pool Boiling Heat Transfer”, ASME Journal of Heat Transfer, Vol. 132, pp. 091502-1 to 091502-9, September 2010, DOI: 10.1115/1.4001632.
  • Raj, R. and Kim, J. “Heater Size and Gravity Based Pool Boiling Regime Map: Transition Criteria Between Buoyancy and Surface Tension Dominated Boiling”, ASME Journal of Heat Transfer, Vol. 132, pp. 091503-1 to 091503-10, September 2010, DOI: 10.1115/1.4001635.

2009

  • Moores, K.A., Kim, J., and Joshi, Y.K. “Heat Transfer and Fluid Flow in Shrouded Pin Fin Arrays With and Without Tip Clearance”, International Journal of Heat and Mass Transfer, Vol. 52, pp. 5978-5989, 2009.
  • Kim, J. “Review of Nucleate Pool Boiling Heat Transfer Mechanisms”, International Journal of Multiphase Flow, Vol. 35, pp. 1067-1076, 10.1016/j.ijmultiphaseflow.2009.07.008, 2009. 

2007

  • Moghaddam, S., Lawler, J., Currano, J., and Kim, J. “A novel method for measurement of total hemispherical emissivity,” AIAA Journal of Thermophysics and Heat Transfer, Vol. 21, No. 1, pp. 128-133, 2007.
  • Kim, J. “Spray cooling heat transfer: The state of the art,” International Journal of Heat and Fluid Flow, Vol. 28, No. 4, pp. 753-767, 2007.
  • Coursey, J.S., Kim, J., and Kiger, K.T. “Spray cooling of high aspect ratio open microchannels,” Journal of Heat Transfer, Vol. 129, No. 8, pp. 1052-1059, 2007.

2006

  • Henry, C.D., Kim, J., and McQuillen, J. “Dissolved Gas Effects on Thermocapillary Convection During Boiling in Reduced Gravity Environments,” Heat and Mass Transfer, Vol. 42, pp. 919-928, 2006.
  • Silk, E.A., Kim, J., and Kiger, K. “Spray Cooling of Enhanced Surfaces: Impact of Structured Surface Geometry and Spray Axis Inclination”, International Journal of Heat and Mass Transfer, Vol. 49, pp. 4910-4920, 2006.

2005

  • Coursey, J. S., Kim, J., and Boudreaux, P.J., “Performance of graphite foam evaporator for use in thermal management,” Journal of Electronic Packaging, Vol. 127, No. 2, pp. 127-134, 2005.
  • Henry, C.D., Kim, J., “Thermocapillary Effects on Low-G Pool Boiling From Microheater Arrays of Various Aspect Ratio,” Microgravity Science and Technology, XVI, pp. 170-175, 2005.
  • Horacek, B., Kiger, K., Kim, J., “Single Nozzle Spray Cooling Heat Transfer Mechanisms,” International Journal of Heat and Mass Transfer, Vol. 48, No. 8, pp. 1425-1438, 2005.
  • Myers, J.G., Yerrramilli, V.K., Hussey, S.W., Yee, G.F., and Kim, J., “Time and space resolved wall temperature and heat flux measurements during nucleate boiling with constant heat flux boundary conditions,” International Journal of Heat and Mass Transfer, Vol. 48, No. 12, pp. 2429-2442, 2005.
  • Henry, C.D., Kim, J., Chamberlain, B., and Hartmann, T.G., “Heater aspect ratio effects on pool boiling heat transfer under varying gravity conditions,” Experimental Thermal and Fluid Science, Vol. 29, No. 7, pp. 773-782, 2005.

Powering a Greener Future

Engineering Sustainability Day showcases entrepreneurial talent